Aluminum Body Insert Assembly

PARTS LIST
- Aluminum Body Insert Assembly

Item		Description	Material	Part#	Qty

	1	Pilot Function Sticker	Aluminum	201-033-01	1
	2	Bottom Cap	Aluminum	201-014-02	1

	3	Bottom Cap O-Ring*	Nitrile	021-112-01	1

	4	Orifice Spring	Stainless Steel	040-005-01	1	/td>
	5	Return Spring	Stainless Steel	040-006-01	1
	6	Stem Guide	304 Stainless Steel	201-018-01	1

	7	Plug & Stem Assembly	Stainless Steel/Nitrile	201-015-01	1

	8	.150 Orifice (Std)	304 Stainless Steel	201-019-01	1
		.170 Orifice (Std)	304 Stainless Steel	201-045-01	1

	9	Orifice O-Ring*	Nitrile	021-108-01	1

	10	Backup Washer	304 Stainless Steel	201-024-01	1
	11	Body Insert	Aluminum	201-013-02	1

	12	Body Insert O-Ring (Lower)*	Nitrile	021-120-01	1
	13	Body Insert O-Ring (Upper)*	Nitrile	021-117-02	1
	14	Stem O-Ring*	Nitrile	021-103-01	1



	Boxed items indicate recommended spare parts
	*All O-Rings are included in the Series 20 Pilot Nitrile O-Ring Seal Kit, p/n 240-008-01

1 Note: The Series 20L-Aluminum Pilot MAY NOT be used in the Back Pressure (BPV / Relief) mode to control the Flowgrid TM Valve because the Series 20L Pilot set point range is BELOW the minimum differential required to open the Flowgrid TM Valve

40 West Gregson Ave. Salt Lake City, Utah 84115
Phone: (801) 487-2225 FAX (801) 487-2587
E-MAIL: mail@mooneycontrols.com